2007-2013 Highlander Kluger · Service Manual BRAKE

DISASSEMBLY

Removal / installation · Vehicles built from May 2007


1. REMOVE BRAKE PEDAL SUB-ASSEMBLY

  1. C165379
    Disengage the 2 clamps.

  1. C165377E01
    Remove the bolt, nut and brake pedal sub-assembly from the brake pedal support sub-assembly.


2. REMOVE BRAKE PEDAL SHAFT COLLAR
  1. Remove the brake pedal shaft collar from the brake pedal sub-assembly.


3. REMOVE BRAKE PEDAL BUSHING
  1. Remove the 2 brake pedal bushings from the brake pedal sub-assembly.


4. REMOVE BRAKE PEDAL PAD
  1. Remove the brake pedal pad from the brake pedal sub-assembly.

← REMOVAL (from Jul 2010)ADJUSTMENT (May 2007 – Jul 2008) →