2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

Entry Answer-back Buzzer does not Sound

Circuit diagnosis · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

DESCRIPTION

The smart entry and start uses the wireless door lock buzzer to perform various vehicle exterior warnings. When the conditions for each warning are met, the certification ECU (smart key ECU assembly) sends a buzzer signal to the wireless door lock buzzer, and the wireless door lock buzzer sounds.

HINT:
for RHD only


INSPECTION PROCEDURE

NOTICE:
Before performing the inspection, check that there are no problems related to "CAN COMMUNICATION SYSTEM" and "LIN COMMUNICATION SYSTEM".


1. CHECK WIRELESS DOOR LOCK BUZZER OPERATION
  1. When the wireless operation is used to lock or unlock the doors, check that the wireless door lock buzzer sounds normally.

    OK:
    Wireless door lock buzzer sounds.



NG
GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (Click here)
OK

REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)


← Entry Answer-back Buzzer does not Sound (May 2007 – Jul 2008)Entry Answer-back Buzzer does not Sound (from Jul 2010) →