2007-2013 Highlander Kluger · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ Compass)

  1. B261582E01
    Inspect operation of the electrochromic inner mirror.

    1. Connect the positive (+) lead from the battery to terminal 6 and the negative (-) lead to terminal 3.

    2. Attach black colored tape to the forward sensor to prevent it from sensing.

    3. Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.

      OK:
      Mirror surface changes from bright to dark.

      If the result is not as specified, replace the mirror assembly.


INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/o Compass)

  1. B176188E02
    Inspect operation of the electrochromic inner mirror.

    1. Connect the positive (+) lead from the battery to terminal 7 and the negative (-) lead to terminal 6.

    2. Attach black colored tape to the forward sensor to prevent it from sensing.

    3. Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.

      OK:
      Mirror surface changes from bright to dark.

      If the result is not as specified, replace the mirror assembly.

← INSPECTION (May 2007 – Jun 2010)INSTALLATION (May 2007 – Jun 2010) →