2007-2013 Highlander Kluger · Service Manual
BODY ELECTRICAL
Home
›
BODY ELECTRICAL
› LIGHTING › SIDE TURN SIGNAL LIGHT ASSEMBLY
INSPECTION
Inspection
·
Vehicles built from May 2007
INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY
Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.
Check that the side turn signal light comes on.
OK:
The light comes on.
If the result is not as specified, replace the light assembly.
← REMOVAL (from May 2007)
INSTALLATION (from May 2007) →