2007-2013 Highlander Kluger · Service Manual COMMUNICATION SYSTEM

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from May 2007


LIN COMMUNICATION SYSTEM DESCRIPTION
Multiplex communication system (LIN) is used to control communication between the ECUs of the body system. If communication cannot be performed through LIN because of an open in the communication lines or other reason, the master control ECU of the relevant system will output a DTC. For the communication system and the connected ECUs, refer to the table below.

HINT:
Each ECU has a fail-safe function which activates to maintain the minimum performance of the system and protect the system.

  1. Door System LIN Communication System

    ECU
    Master Control
    (LIN Communication DTC Output Function)
    Main Body ECU
    ○ (with output function)
    Front Power Window ECU
    x (without output function)
    Sliding Roof ECU *1
    x (without output function)

    HINT:
    *1: w/ Sliding Roof

  2. Certification System LIN Communication System

    ECU
    Master Control
    (LIN Communication DTC Output Function)
    Certification ECU
    ○ (with output function)
    Main Body ECU
    x (without output function)
    Steering Lock ECU
    x (without output function)
    ID Code Box
    x (without output function)

  3. Air Conditioning LIN Communication System

    Component
    Master Control
    (LIN Communication DTC Output Function)
    Air Conditioning Amplifier Assembly
    ○ (with output function)
    A/C Control Assembly (for Front)
    x (without output function)
    A/C Control Assembly (for Rear)
    x (without output function)

← SYSTEM DIAGRAM (from May 2007)HOW TO PROCEED WITH TROUBLESHOOTING (May 2007 – Jul 2008) →