2007-2013 Highlander Kluger · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built from May 2007


1. REMOVE BOX BOTTOM MAT
  1. Remove the box bottom mat.


2. REMOVE CONSOLE COMPARTMENT DOOR CUSHION

  1. for Console Compartment Door:

    1. B173633E01
      Remove the 2 console compartment door cushions from the console compartment door.

  1. for Rear Console Box Assembly:

    1. B173637
      Remove the 2 console compartment door cushions from the rear console box assembly.


3. REMOVE CONSOLE COMPARTMENT BOX ASSEMBLY (w/o Rear Air Conditioning System)

  1. B173635
    Remove the 14 screws and the console compartment box assembly.


4. REMOVE CONSOLE COMPARTMENT BOX ASSEMBLY (w/ Rear Air Conditioning System)

  1. B175150
    Remove the 14 screws.

  1. Disengage the clamp and remove the console compartment box assembly.


5. REMOVE REAR CONSOLE BOX WIRE (w/ Rear Air Conditioning System)

  1. B175151
    Disengage the 2 clamps and remove the rear console box wire.


6. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY (w/o Rear Air Conditioning System)

  1. B173638
    Disengage the 6 clips and remove the console rear end panel sub-assembly.


7. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY (w/ Rear Air Conditioning System)

  1. B175154
    Disengage the 6 clips and remove the console rear end panel sub-assembly.


8. REMOVE REAR AIR CONDITIONING CONTROL ASSEMBLY (for Manual Air Conditioning System)

  1. E151060
    Disengage the 8 claws and 2 clips, and remove the rear air conditioning control assembly.

  1. Disconnect the connector.


9. REMOVE REAR AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

  1. E151059
    Disengage the 8 claws and 2 clips, and remove the rear air conditioning control assembly.

  1. Disconnect the connector.


10. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY

  1. B173630
    Remove the 4 screws and the console compartment door sub-assembly.


11. REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY

  1. B173632
    Remove the 2 screws and the console compartment door lock sub-assembly.


12. REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY

  1. B173631
    Remove the 4 screws.

  1. Disengage the 3 claws and remove the outer console compartment door.

  1. B173634
    Remove the 4 screws and console compartment door hinge sub-assembly.


13. REMOVE REAR CONSOLE BOX CUP HOLDER

  1. B173639
    Remove the 3 screws.

  1. B173640
    Remove the console box cup holder from the console rear end panel as shown in the illustration.


14. REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/o Rear Air Conditioning System)

  1. B173642E01
    Using a screwdriver, disengage the 8 claws and remove the console box register assembly from the console rear end panel as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.

← REMOVAL (from Jul 2010)REASSEMBLY (from May 2007) →