2007-2013 Highlander Kluger · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from May 2007


1. INSTALL OUTER MIRROR COVER

  1. B173461
    Engage the 8 claws to install the outer mirror cover to the outer rear view mirror assembly with cover.

    NOTICE:
    If there is a gap between the cover and the mirror body, it may cause noise during driving.


2. INSTALL OUTER MIRROR GLASS (w/o Heater)

  1. B173448
    Engage the 2 claws on the upper part of the outer mirror glass to the outer mirror.

  1. B173449
    Engage the 2 claws on the lower part of the outer mirror glass to the outer mirror as shown in the illustration.


3. INSTALL OUTER MIRROR GLASS (w/ Heater)

  1. B173447
    Connect the connectors.

  1. B173448
    Engage the 2 claws on the upper part of the outer mirror glass to the outer mirror.

  1. B173449
    Engage the 2 claws on the lower part of the outer mirror glass to the outer mirror as shown in the illustration.

← REMOVAL (from May 2007)COMPONENTS (from May 2007) →