2007-2013 Highlander Kluger · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from May 2007

OIL PRESSUREĀ 
Condition
Specified Condition
Idle
80 kPa (0.8 kgf/cm2, 11.6 psi) or more
3000 rpm
380 kPa (3.9 kgf/cm2, 55.1 psi) or more
OIL PUMPĀ 
Item
Condition
Specified Condition
Oil pump rotor
Standard side clearance
0.030 to 0.090 mm (0.0012 to 0.0035 in.)
Maximum side clearance
0.090 mm (0.0035 in.)
Standard tip clearance
0.060 to 0.160 mm (0.0024 to 0.0063 in.)
Maximum tip clearance
0.160 mm (0.0063 in.)
Standard body clearance
0.250 to 0.325 mm (0.0098 to 0.0128 in.)
Maximum body clearance
0.325 mm (0.0128 in.)
← TORQUE SPECIFICATIONS (from Aug 2013)TORQUE SPECIFICATIONS (from May 2007) →