2007-2013 Highlander Kluger · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL ENGINE ROOM JUNCTION BLOCK ASSEMBLY

  1. A171750
    Connect the 4 connectors.

  1. Connect the engine room junction block assembly.


2. INSTALL NO. 1 RELAY BLOCK COVER

  1. A171748
    Install the No. 1 relay block cover.


3. INSTALL RESERVOIR BRACKET (for LHD)

  1. A171859
    Install the reservoir bracket with the 2 bolts.

    Torque:
    9.0 N*m{ 92 kgf*cm , 80 in.*lbf }


4. INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY (for LHD)

  1. A171831
    Install the brake master cylinder reservoir assembly with the bolt.

    Torque:
    9.0 N*m{ 92 kgf*cm , 80 in.*lbf }

  1. Connect the level warning switch connector.

← INSTALLATION (May 2007 – Jul 2008)INSTALLATION (from Jul 2010) →