2007-2013 Highlander Kluger · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. SEPARATE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY (for LHD)

  1. A171831
    Disconnect the level warning switch connector.

  1. Remove the bolt, and separate the brake master cylinder reservoir assembly.


2. REMOVE RESERVOIR BRACKET (for LHD)

  1. A171859
    Remove the 2 bolts and reservoir bracket.


3. REMOVE NO. 1 RELAY BLOCK COVER

  1. A171748
    Remove the No. 1 relay block cover.


4. REMOVE ENGINE ROOM JUNCTION BLOCK ASSEMBLY

  1. A171749
    Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the engine room junction block assembly.

  1. A171750
    Disconnect the 4 connectors.

← COMPONENTS (from May 2007)REMOVAL (Aug 2008 – Jun 2010) →