2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

DISASSEMBLY

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. REMOVE NO. 1 HEADLIGHT BULB

  1. E212210
    Remove the No. 1 headlight bulb as shown in the illustration.

    NOTICE:
    Do not touch the bulb glass.


2. REMOVE NO. 2 HEADLIGHT BULB

  1. E212212
    Remove the No. 2 headlight bulb as shown in the illustration.

    NOTICE:
    Do not touch the bulb glass.


3. REMOVE FRONT TURN SIGNAL LIGHT BULB

  1. E212214
    Turn the front turn signal light bulb and the front turn signal light socket in the direction indicated by the arrow and remove them as a unit.

  1. Remove the front turn signal light bulb from the front turn signal light socket.


4. REMOVE CLEARANCE LIGHT BULB

  1. E213576
    Turn the clearance light bulb and clearance light socket in the direction indicated by the arrow as shown in the illustration, and remove them as a unit.

  1. Remove the clearance light bulb from the clearance light socket.


5. REMOVE HEADLIGHT LEVELING MOTOR (w/ Headlight Leveling)

  1. E213578E01
    Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (1) as shown in the illustration.

  1. Turn the headlight leveling motor in the direction indicated by the arrow (2) as shown in the illustration to release it.

  1. E213579E01
    Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (3) as shown in the illustration to disengage the shaft.

  1. Pull out the headlight leveling motor in the direction indicated by the arrow (4) as shown in the illustration to remove it.


6. REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING (w/ Headlight Leveling)
  1. Remove the headlight leveling motor base packing.

← DISASSEMBLY (May 2007 – Jun 2010)ADJUSTMENT (May 2007 – Jun 2010) →