2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

REASSEMBLY

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING (w/ Headlight Leveling)
  1. Install a new headlight leveling motor base packing.


2. INSTALL HEADLIGHT LEVELING MOTOR (w/ Headlight Leveling)

  1. E213580E01
    Insert the headlight leveling motor in the direction indicated by the arrow (1) as shown in the illustration.

  1. Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (2) as shown in the illustration to engage the shaft.

  1. E213581E01
    Turn the headlight leveling motor in the direction indicated by the arrow (3) as shown in the illustration.

  1. Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (4) as shown in the illustration to install it.


3. INSTALL CLEARANCE LIGHT BULB
  1. Install the clearance light bulb to the clearance light socket.

  1. E213577
    Turn the clearance light bulb and clearance light socket in the direction indicated by the arrow as shown in the illustration to install them as a unit.


4. INSTALL FRONT TURN SIGNAL LIGHT BULB
  1. Install the front turn signal light bulb to the front turn signal light socket.

  1. E150047
    Turn the front turn signal light bulb and front turn signal light socket in the direction indicated by the arrow and install them as a unit.


5. INSTALL NO. 2 HEADLIGHT BULB

  1. E212213
    Install the No. 2 headlight bulb as shown in the illustration.


6. INSTALL NO. 1 HEADLIGHT BULB

  1. E212211
    Install the No. 1 headlight bulb as shown in the illustration.

← REASSEMBLY (May 2007 – Jun 2010)INSTALLATION (May 2007 – Jun 2010) →