2007-2013 Highlander Kluger · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. INSTALL REAR BUMPER ASSEMBLY
  1. w/ Rear Fog Light:

    1. Connect the rear fog light connector.

  1. B256711
    Engage the 7 claws and install the rear bumper assembly.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. B256713
    Install the 5 clips, 2 screws and 2 bolts.

  1. B263957
    Install the 2 screws.

    HINT:
    Use the same procedure for the RH side and LH side.


2. INSTALL REAR QUARTER PANEL MUDGUARD LH

  1. B261562E01
    Install the 2 screws (A).

  1. Using a 4 mm hexagon wrench, install the 3 screws (B).


3. INSTALL REAR QUARTER PANEL MUDGUARD RH

HINT:
Use the same procedure as for the LH side.

← INSTALLATION (May 2007 – Jun 2010)COMPONENTS (May 2007 – Jun 2010) →