2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from May 2007


1. INSTALL WIPER RUBBER

  1. E152619
    Install the 2 wiper rubber backing plates to the wiper rubber.

    NOTICE:
    1. Align the protrusions on the wiper rubber with the notches in the backing plates.
    2. Align the curves of the backing plates with the curve of the glass.

  1. E112266
    Install the wiper rubber and the 2 wiper rubber backing plates to the front wiper blade with the tip of the rubber (curved end) facing the axis of the wiper arm.

    HINT:
    Firmly push the wiper rubber into the wiper blade to securely engage them.


2. INSTALL FRONT WIPER BLADE

  1. Install the front wiper blade as shown in the illustration.

    E150196E01

  1. Engage the holder on the front wiper blade.

← REMOVAL (from May 2007)COMPONENTS (from May 2007) →