2007-2013 Highlander Kluger · Service Manual RESTRAINTS

INSTALLATION

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY
  1. Install the rear No. 2 seat inner belt assembly with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    HINT:
    Use the same procedure for the RH side and LH side.


2. INSTALL DECK FLOOR BOARD ASSEMBLY

  1. B260042
    Install the rear deck floor board assembly with the 4 nuts and 4 bolts.


3. INSTALL REAR MAT

  1. B173249
    Install the rear mat.


4. INSTALL DECK SIDE TRIM BOX LH

  1. Install the deck side trim box LH as shown in the illustration.

    B178555

  1. B173243E01
    Install the 2 deck side trim clips and clip.


5. INSTALL REAR SEAT SIDE COVER LH

  1. B173607
    Engage the 2 clips and install the rear seat side cover LH.


6. INSTALL DECK SIDE TRIM BOX RH

  1. Install the deck side trim box RH as shown in the illustration.

    B178553

  1. B173247E01
    Install the 2 deck side trim clips and clip.


7. INSTALL JACK CARRIER ASSEMBLY (for LHD)

  1. B178549
    Engage the 3 claws, and install the jack carrier assembly.


8. INSTALL JACK CARRIER ASSEMBLY (for RHD)

  1. B179786
    Engage the 3 claws, and install the jack carrier assembly.


9. INSTALL JACK ASSEMBLY (for LHD)

  1. B173245
    Install the jack assembly.


10. INSTALL JACK ASSEMBLY (for RHD)

  1. B178566
    Install the jack assembly.


11. INSTALL JACK CARRIER CUSHION (for LHD)

  1. B178550
    Install the jack carrier cushion.


12. INSTALL JACK CARRIER CUSHION (for RHD)

  1. B178551
    Install the jack carrier cushion.


13. INSTALL JACK CARRIER SUPPORT

14. INSTALL REAR SEAT SIDE COVER RH

  1. B173608
    Engage the 2 clips and install the rear seat side cover RH.


15. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

16. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

  1. B173244
    Engage the 2 guides and install the No. 2 deck board sub-assembly.


17. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

  1. B173242
    Engage the 2 guides and install the No. 3 deck board sub-assembly.


18. INSTALL DECK BOARD ASSEMBLY

  1. B173240
    Install the deck board assembly.

← INSTALLATION (Aug 2008 – Jun 2010)COMPONENTS (May 2007 – Jun 2010) →