2007-2013 Highlander Kluger · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE REAR CENTER SEAT ASSEMBLY (for LH Side)

2. REMOVE REAR SEAT HEADREST ASSEMBLY

3. REMOVE REAR SEAT TRACK BRACKET COVER

  1. B173775
    Disengage the 8 claws and remove the 2 rear seat track bracket covers.


4. REMOVE REAR OUTER TRACK BRACKET COVER

  1. B173776
    Disengage the 4 claws and remove the rear outer track bracket cover.


5. REMOVE REAR INNER TRACK BRACKET COVER

  1. B173777
    Disengage the 4 claws and remove the rear inner track bracket cover.


6. REMOVE REAR SEAT LEG SIDE COVER

  1. B173779
    Disengage the 3 claws.

  1. Disengage the clip and remove the rear seat leg side cover.


7. DISCONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY (w/ Remote Folding Function)

  1. Pull down the adjuster's lock piece to release the lock as shown in the illustration.

    B180388E01

  1. B174594E01
    Using a screwdriver wrapped with protective tape, disengage the 2 claws as shown in the illustration.

  1. Lift up the seat track adjusting handle to the uppermost position and hold the handle in this position as shown in the illustration.

    B173770E01

  1. Using a screwdriver wrapped with protective tape, disconnect the rear No. 1 seat lock cable assembly as shown in the illustration.

  1. Using a screwdriver wrapped with protective tape, disconnect the rear seat reclining control cable as shown in the illustration.

    B180393E01

  1. Secure the rear seat reclining control cable with the carpet hole as shown in the illustration.


8. REMOVE REAR NO. 1 SEAT ASSEMBLY

  1. B173780
    Remove the 3 bolts on the rear side of the seat.

  1. B173778
    Remove the 2 bolts on the front side of the seat and the rear No. 1 seat assembly.

    NOTICE:
    Be careful not to damage the vehicle body.


9. REMOVE REAR DOOR SCUFF PLATE

  1. B173228
    Disengage the 5 claws, 3 clips and guide, and remove the rear door scuff plate LH.


10. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

11. REMOVE DECK BOARD ASSEMBLY

  1. B173240
    Remove the deck board assembly.


12. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

  1. B173242
    Disengage the 2 guides and remove the No. 3 deck board sub-assembly.


13. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY

  1. B173244
    Disengage the 2 guides and remove the No. 2 deck board sub-assembly.


14. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
  1. Remove the tonneau cover assembly.


15. REMOVE REAR NO. 1 FLOOR BOARD (w/o Rear No. 2 Seat)

  1. B175152
    Disengage the 3 clips and 3 guides, and remove the rear No. 1 floor board.


16. REMOVE REAR SEAT SIDE COVER LH (w/ Rear No. 2 Seat)

  1. B173607
    Disengage the 2 clips and remove the rear seat side cover LH.


17. REMOVE DECK SIDE TRIM BOX LH

  1. B173243E01
    Remove the 2 deck side trim clips and clip.

  1. Remove the deck side trim box LH as shown in the illustration.

    B178554


18. REMOVE REAR SEAT SIDE COVER RH (w/ Rear No. 2 Seat)

  1. B173608
    Disengage the 2 clips and remove the rear seat side cover RH.


19. REMOVE JACK CARRIER SUPPORT

20. REMOVE JACK CARRIER CUSHION (for LHD)

  1. B178550
    Remove the jack carrier cushion.


21. REMOVE JACK CARRIER CUSHION (for RHD)

  1. B178551
    Remove the jack carrier cushion.


22. REMOVE JACK ASSEMBLY (for LHD)

  1. B173245
    Remove the jack assembly.


23. REMOVE JACK ASSEMBLY (for RHD)

  1. B178566
    Remove the jack assembly.


24. REMOVE JACK CARRIER ASSEMBLY (for LHD)

  1. B178548
    Using a screwdriver, disengage the 3 claws and remove the jack carrier assembly.


25. REMOVE JACK CARRIER ASSEMBLY (for RHD)

  1. B179785
    Using a screwdriver, disengage the 3 claws and remove the jack carrier assembly.


26. REMOVE DECK SIDE TRIM BOX RH

  1. B173247E01
    Remove the 2 deck side trim clips and clip.

  1. Remove the deck side trim box RH as shown in the illustration.

    B178552


27. REMOVE DECK FLOOR BOARD ASSEMBLY (w/o Rear No. 2 Seat)

  1. B178560
    Remove the 4 bolts and 4 nuts.

  1. Remove the deck floor board assembly.


28. REMOVE REAR MAT

  1. B173249
    Remove the rear mat.


29. REMOVE DECK FLOOR BOARD ASSEMBLY (w/ Rear No. 2 Seat)

  1. B260042
    Disengage the 3 claws.

  1. Remove the 2 nuts and deck floor board assembly.


30. REMOVE REAR DECK FLOOR BOX (w/o Rear No. 2 Seat)

  1. B173679
    Remove the 2 nuts and the deck floor box.


31. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY (w/ Rear No. 2 Seat)

  1. B256543
    Remove the bolt and rear No. 2 seat inner belt assembly.

    HINT:
    Use the same procedure for the RH side and LH side.


32. DISCONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH (w/ Rear No. 2 Seat)

  1. B256544
    Remove the bolt and disconnect the rear No. 2 seat outer belt assembly LH.


33. DISCONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH (w/ Rear No. 2 Seat)

HINT:
Use the same procedure as for the LH side.


34. REMOVE CENTER SEAT CUSHION COVER SUB-ASSEMBLY (w/ Rear No. 2 Seat)

  1. B260172E01
    Disengage the 2 claws <A>.

  1. Disengage the 2 claws <B> and remove the center seat cushion cover sub-assembly.


35. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)

  1. Remove the bolt on the front of the seat.

    B260173

  1. Remove the 6 bolts on the rear of the seat and the rear No. 2 seat assembly.

    B260174


36. REMOVE REAR FLOOR FINISH PLATE

  1. B173609
    Disengage the 4 clips and 4 claws, and remove the rear floor finish plate.


37. REMOVE REAR SEAT SIDE GARNISH CAP (for RH Side without Rear Air Conditioning System)

  1. B173614
    Disengage the 8 claws and guide, and remove the rear seat side garnish cap.


38. REMOVE REAR SEAT SIDE GARNISH CAP (for RH Side with Rear Air Conditioning System)

  1. B173616
    Remove the screw.

  1. Disengage the 6 claws and the guide, and remove the rear seat side garnish cap.


39. REMOVE DECK SIDE TRIM COVER

  1. B173595E01
    Using a screwdriver, disengage the 2 claws and remove the deck side trim cover LH.

    HINT:
    Tape the screwdriver tip before use.


40. REMOVE DECK SIDE TRIM

  1. B173596
    Remove the bolt.

  1. B173623
    Disengage the 4 claws and 3 guides, and remove the deck side trim LH as shown in the illustration.


41. REMOVE SIDE TRIM COVER LH (for LH Side)

  1. B173597
    Disengage the 10 claws and remove the side trim cover LH.


42. REMOVE SIDE TRIM COVER RH (for RH Side without Rear Automatic Air Conditioning System)

  1. B173610
    Disengage the 4 claws and remove the side trim cover RH.


43. REMOVE REAR ROOM TEMPERATURE SENSOR (for RH Side with Rear Automatic Air Conditioning System)

  1. E150364
    Disengage the 4 claws and remove the rear room temperature sensor.

  1. Disconnect the connector.


44. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH (for LH Side)

  1. B173611E01
    Using a screwdriver, disengage the 6 claws and 2 guides, and remove the rear combination light service cover LH.

    HINT:
    Tape the screwdriver tip before use.


45. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH (for RH Side)

  1. B173618E01
    Using a screwdriver, disengage the 6 claws and 2 guides, and remove the rear combination light service cover RH.

    HINT:
    Tape the screwdriver tip before use.


46. REMOVE REAR POWER POINT SOCKET ASSEMBLY (for LH Side)
  1. Disconnect the connector.

  1. E151327
    Disengage the claw and remove the rear power point socket assembly.


47. REMOVE REAR POWER OUTLET SOCKET COVER (for LH Side)

  1. E151328
    Disengage the 2 claws and remove the rear power outlet socket cover.


48. REMOVE REAR DECK TRIM COVER (for LH Side without Remote Folding Function)

  1. B173602
    Disengage the 10 claws and remove the rear deck trim cover.


49. REMOVE RECLINING REMOTE CONTROL LEVER BEZEL LH (for LH Side with Remote Folding Function)

  1. B173603
    Disengage the 5 claws and remove the reclining remote control lever bezel LH.


50. REMOVE ROPE HOOK ASSEMBLY

  1. B173598E01
    for Front Side:

    1. Using a screwdriver, disengage the 2 claws.

      HINT:
      Tape the screwdriver tip before use.

    2. Remove the bolt and rope hook assembly.

  1. B173600E01
    for Rear Side:

    1. Using a screwdriver, disengage the 2 claws.

      HINT:
      Tape the screwdriver tip before use.

    2. Remove the bolt and rope hook assembly.


51. REMOVE NO. 2 DECK SIDE TRIM HOOK (for LH Side)

  1. B173612
    Remove the screw and No. 2 deck side trim hook.


52. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side)

HINT:
Use the same procedure for the No. 1 luggage compartment trim hook and the No. 2 deck side trim hook.


53. REMOVE FRONT DECK SIDE TRIM COVER

  1. B173604E01
    Using a screwdriver, disengage the 4 claws and remove the 2 front deck side trim covers LH.

    HINT:
    Tape the screwdriver tip before use.


54. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY

  1. B170933
    Remove the bolt and disconnect the floor end of the rear No. 1 seat outer belt assembly.


55. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)
  1. Remove the 2 bolts.

  1. Remove the 2 clips.

  1. Disengage the 7 claws and 4 clips, and remove the deck trim side panel assembly LH.

    B173613


56. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)
  1. Remove the 3 bolts.

  1. Remove the 2 clips.

  1. Disengage the 7 claws and 4 clips, and remove the deck trim side panel assembly RH.

    B173622


57. REMOVE QUARTER PILLAR GARNISH

  1. B175156
    Disengage the 2 claws and 2 guides, and remove the No. 1 seat outer belt guide.

  1. B173263
    Disengage the 2 clips and 2 guides, and remove the quarter pillar garnish LH.


58. REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY

  1. B170911
    Remove the bolt and disconnect the shoulder anchor of the rear No. 1 seat outer belt assembly.

  1. B170912
    Remove the 2 bolts and rear No. 1 seat outer belt assembly.

← REMOVAL (Aug 2008 – Jun 2010)INSTALLATION (May 2007 – Jul 2008) →