2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL COMBINATION METER ASSEMBLY
  1. Connect the connector.

  1. E152487
    Install the combination meter assembly with the 4 screws.


2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

  1. E152488
    Engage the 4 claws, 4 clips and install the instrument cluster finish panel assembly.


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Aug 2008 – Jun 2010)COMPONENTS (from May 2007) →