2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the terminal to prevent airbag deployment (Click here).

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

  1. E152488
    Disengage the 4 claws, 4 clips and remove the instrument cluster finish panel assembly.


3. REMOVE COMBINATION METER ASSEMBLY

  1. E152487
    Remove the 4 screws.

  1. Disconnect the connector and remove the combination meter assembly.

← REMOVAL (Aug 2008 – Jun 2010)DISASSEMBLY (from May 2007) →