2007-2013 Highlander Kluger · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT INTAKE MANIFOLD

  1. A134934E01
    Cylinder head side:

    1. Using a precision straightedge and feeler gauge, measure the surface contacting the cylinder head for warpage.

      Maximum warpage:
      0.1 mm (0.003 in.)
      If the warpage is greater than the maximum, replace the intake manifold.

  1. Surge tank side:

    1. Using a precision straightedge and feeler gauge, measure the surface contacting the surge tank for warpage.

      Maximum warpage:
      0.1 mm (0.003 in.)
      If the warpage is greater than the maximum, replace the intake manifold.

← REMOVAL (from Aug 2013)INSTALLATION (May 2007 – Jul 2008) →