REMOVAL
Removal / installation · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jun 2010 from Jul 2010
| 1.
REMOVE BACK WINDOW UPPER TRIM PANEL ASSEMBLY
|
 |
- Disengage the 4 clips and 4 claws, and remove the back window upper trim panel assembly.
| 2.
REMOVE BACK DOOR TRIM COVER LH (w/o Power Back Door)
|
 |
- Disengage the 2 clips and 2 claws, and remove the back door trim cover LH.
| 3.
REMOVE BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door)
|
 |
- Disengage the 6 claws, and remove the back door service hole cover LH.
| 4.
DISCONNECT POWER BACK DOOR ROD (w/ Power Back Door)
|
 |
- Disconnect the power back door rod and remove the back door stay plate.
| 5.
REMOVE BACK DOOR TRIM COVER LH (w/ Power Back Door)
|
 |
- Disengage the 2 clips and 2 claws, and remove the back door trim cover LH.
| 6.
REMOVE BACK DOOR TRIM COVER RH
|
 |
- Disengage the 2 clips and 2 claws, and remove the back door trim cover RH.
| 7.
REMOVE BACK DOOR LOCK COVER (for Glass Hatch Type)
|
 |
- Disengage the 2 claws and 4 guides, and remove the back door lock cover.
| 8.
REMOVE ASSIST STRAP HOLE COVER
|
 |
- Disengage the 2 claws and 2 guides, and remove the assist strap hole cover.
| 9.
REMOVE ASSIST STRAP ASSEMBLY
|
 |
- Remove the bolt and assist strap assembly.
| 10.
REMOVE BACK DOOR TRIM PANEL ASSEMBLY
|
 |
- Disengage the 16 clips and remove the back door trim panel assembly.
| 11.
REMOVE BACK DOOR OUTSIDE GARNISH ASSEMBLY
|
 |
- Disconnect each connector.
Remove the 5 nuts.
- Disengage the 2 clips and remove the back door outside garnish assembly.
Remove the 2 clips and 5 gaskets.
| 12.
REMOVE LICENSE PLATE LIGHT ASSEMBLY |
 |
- Disengage the clamp.
- Remove the 2 screws.
Disengage the 2 guides as shown in the illustration.
Remove the license plate light assembly.