2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

  1. E135376
    Engage the claw while loosening the clamp as shown in the illustration.

  1. E150079
    Engage the clamp and install the headlight dimmer switch assembly as shown in the illustration.

  1. Connect the connector.


2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

  1. E151096
    Engage the claw and install the windshield wiper switch assembly.

  1. Connect the 2 connectors.


3. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR
(Click here)
← INSTALLATION (Aug 2008 – Jun 2010)COMPONENTS (from May 2007) →