2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE SPIRAL CABLE WITH STEERING ANGLE SENSOR
(Click here)

2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

  1. E151096
    Disconnect the 2 connectors.

  1. Disengage the claw and remove the windshield wiper switch assembly.

    NOTICE:
    If the claw is pushed with excessive force, it may break.


3. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY

  1. E150079
    Disconnect the connector.

  1. Disengage the clamp as shown in the illustration.

  1. E146403
    Disengage the claw and remove the headlight dimmer switch assembly as shown in the illustration.

← REMOVAL (Aug 2008 – Jun 2010)INSPECTION (from May 2007) →