INSTALLATION
Removal / installation · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY (w/o Radio Receiver) |
|
| 2.
INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)
|
 |
Install the radio tuner opening cover with bracket to the integration control panel assembly with the 2 screws.
| 3.
INSTALL NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System) |
|
| 4.
INSTALL NO. 2 RADIO BRACKET (w/ Navigation System)
|
 |
- Install the No. 2 radio bracket with the 6 screws.
| 5.
INSTALL NO. 1 RADIO BRACKET (w/ Navigation System)
|
 |
- Install the No. 1 radio bracket with the 6 screws.
- Engage the claw and connect the connector.
| 6.
INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY (w/ Radio Receiver)
|
 |
- Engage the 2 clips and install the integration control and panel assembly.
- Engage the claw and connect the connector.
| 7.
INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY WITH BRACKET (w/o Radio Receiver)
|
 |
Connect each connector.
- Engage the 4 clips.
Install the integration control and panel assembly with bracket with the 4 bolts <D>.
| 8.
INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)
|
 |
Connect each connector.
- Engage the 4 clips.
- Install the navigation receiver assembly with bracket with the 4 bolts.
| 9.
INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)
|
 |
Connect each connector.
- Engage the 4 clips.
- Install the radio receiver assembly with bracket with the 4 bolts.
| 10.
INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System)
|
 |
Connect the connector.
- Engage the 4 clips and install the heater control and accessory assembly.
| 11.
INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
|
 |
Connect the connector.
- Engage the 4 clips and install the air conditioning control assembly.
| 12.
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Entry and Start System)
|
 |
- Apply protective tape to the areas shown in the illustration.
Connect each connector.
Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.
- NOTICE:
- Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.
| 13.
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Entry and Start System)
|
 |
- Apply protective tape to the areas shown in the illustration.
Connect each connector.
Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.
- NOTICE:
- Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.
| 14.
INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
|
 |
- Engage the 2 claws and 5 clips, and install the center instrument panel register assembly.