INSTALLATION
Removal / installation · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
INSTALL AUTOMATIC LIGHT CONTROL SENSOR |
 |
- Engage the 2 claws and install the automatic light control sensor.
Connect the connector.
| 2.
INSTALL DEFROSTER NOZZLE ASSEMBLY
|
 |
- Install the defroster nozzle assembly with the 3 screws <E> and clip.
| 3.
INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT
|
 |
- Install the side No. 2 defroster nozzle duct with the screw <E>.
| 4.
INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT
|
 |
- Install the side No. 1 defroster nozzle duct with the screw <E>.
| 5.
INSTALL NO. 4 HEATER TO REGISTER DUCT
|
 |
- Install the No. 4 heater to register duct with the 3 screws <E>.
| 6.
INSTALL NO. 1 HEATER TO REGISTER DUCT
|
 |
- Install the No. 1 heater to register duct with the 3 screws <E>.
| 7.
INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY |
 |
(Click here)