2007-2013 Highlander Kluger · Service Manual SECURITIES

INSTALLATION

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL TRANSPONDER KEY AMPLIFIER

  1. C115570
    Align the transponder key amplifier with the upper bracket. Tilt the amplifier slightly and slide it into the position as shown in the illustration.

  1. Push the transponder key amplifier to install it to the upper bracket with the 2 claws.

    NOTICE:
    Do not push the amplifier with excessive force.


2. INSTALL STEERING COLUMN COVER

  1. C165716
    Engage the claw to install the upper steering column cover.

  1. C166128
    Engage the 2 claws to install the lower steering column cover.

  1. C165715
    Install the 2 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }

← INSTALLATION (Aug 2008 – Jun 2010)PRECAUTION (May 2007 – Jul 2008) →