2007-2013 Highlander Kluger · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL BACK DOOR CONTROL SWITCH

  1. B172985
    Engage the 2 claws and install the back door control switch.


2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
  1. Connect each connector and clamp.

  1. B168370
    Engage the 4 claws and 3 clips.

  1. Install the lower instrument panel sub-assembly with the 2 bolts <B> and 3 screws <F>.


3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  1. B173000
    Engage the 2 guides.

  1. Engage the 3 claws and install the No. 2 instrument panel under cover sub-assembly.


4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

  1. B177271
    Engage the claw and clip, install the cowl side trim sub-assembly RH.

  1. Install the clip.


5. INSTALL FRONT DOOR SCUFF PLATE RH

  1. B177270
    Engage the guide and the 8 claws, and install the front door scuff plate RH.

← INSPECTION (from May 2007)INSTALLATION (Aug 2008 – Jun 2010) →