2007-2013 Highlander Kluger · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE FRONT DOOR SCUFF PLATE RH

  1. B177270
    Disengage the 8 claws and guide, and remove the front door scuff plate RH.


2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

  1. B177271
    Remove the clip.

  1. Disengage the clip and claw, and remove the cowl side trim sub-assembly RH.


3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  1. B172999
    Disengage the 3 claws.

  1. Disengage the 2 guides and remove the No. 2 instrument panel under cover sub-assembly.


4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY

  1. B168370
    Remove the 2 bolts <B> and 3 screws <F>.

  1. Disengage the 4 claws and 3 clips.

  1. Disconnect each connector and clamp, and remove the lower instrument panel sub-assembly.


5. REMOVE BACK DOOR CONTROL SWITCH

  1. B172985
    Disengage the 2 claws and remove the back door control switch.

← COMPONENTS (from May 2007)REMOVAL (Aug 2008 – Jun 2010) →