REMOVAL
Removal / installation · Vehicles built May 2007 – Jun 2010
Versions by build date: May 2007 – Jun 2010 from Jul 2010
| 1.
REMOVE BACK WINDOW UPPER TRIM PANEL ASSEMBLY
|
 |
- Disengage the 4 clips and 4 claws, and remove the back window upper trim panel assembly.
| 2.
REMOVE BACK DOOR SERVICE HOLE COVER LH
|
 |
- Disengage the 6 claws, and remove the back door service hole cover LH.
| 3.
DISCONNECT POWER BACK DOOR ROD
|
 |
- Disconnect the power back door rod and remove the back door stay plate.
| 4.
REMOVE BACK DOOR TRIM COVER LH
|
 |
- Disengage the 2 clips and 2 claws, and remove the back door trim cover LH.
| 5.
REMOVE BACK DOOR TRIM COVER RH
|
 |
- Disengage the 2 clips and 2 claws, and remove the back door trim cover RH.
| 6.
REMOVE BACK DOOR LOCK COVER
|
 |
- Disengage the 2 claws and 4 guides, and remove the back door lock cover.
| 7.
REMOVE ASSIST STRAP HOLE COVER
|
 |
- Disengage the 2 claws and 2 guides, and remove the assist strap hole cover.
| 8.
REMOVE ASSIST STRAP ASSEMBLY
|
 |
- Remove the bolt and assist strap assembly.
| 9.
REMOVE BACK DOOR TRIM PANEL ASSEMBLY
|
 |
- Disengage the 16 clips and remove the back door trim panel assembly.
| 10.
REMOVE POWER BACK DOOR WARNING BUZZER |
 |
- Disconnect the connector.
Disengage the clamp and remove the power back door warning buzzer.