2007-2013 Highlander Kluger · Service Manual HEATER & AIR CONDITIONING SYSTEM

INSTALLATION

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY
  1. Connect the connector.

  1. E150368
    Engage the 4 clips and install the heater control and accessory assembly.


2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

  1. B184679E01
    Apply protective tape to the areas shown in the illustration.

  1. Connect each connector.

  1. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

    NOTICE:
    Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.

← INSTALLATION (Aug 2008 – Jun 2010)COMPONENTS (from May 2007) →