INSTALLATION
Removal / installation · Vehicles built Aug 2008 – Jun 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY |
 |
- Install the air conditioning amplifier assembly with the 2 screws.
Connect each connector.
| 2.
INSTALL ECM (for RHD)
|
 |
- Install the 2 nuts, bolt and ECM.
-
Torque:
- 8.0 N*m{
82 kgf*cm
, 71 in.*lbf
}
Install the wire harness clamp.
Connect the 5 ECM connectors.
Connect the harness connector (LHD).
| 3.
INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
|
 |
Connect each connector and clamp.
- Engage the 4 claws and 3 clips.
Install the lower instrument panel sub-assembly with the 2 bolts <B> and 3 screws <F>.
| 4.
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
|
 |
- Engage the 2 guides.
Engage the 3 claws and install the No. 2 instrument panel under cover sub-assembly.
| 5.
INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
|
 |
- HINT:
- Use the same procedure for the RH side and the LH side.
| 6.
INSTALL FRONT DOOR SCUFF PLATE RH
|
 |
- HINT:
- Use the same procedure for the RH side and the LH side.