REMOVAL
Removal / installation · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY |
 |
(Click here)
| 2.
REMOVE NO. 1 HEATER TO REGISTER DUCT
|
 |
- Remove the 3 screws <E> and the No. 1 heater to register duct.
| 3.
REMOVE NO. 4 HEATER TO REGISTER DUCT
|
 |
- Remove the 3 screws <E> and the No. 4 heater to register duct.
| 4.
REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT
|
 |
- Remove the screw <E> and the side No. 1 defroster nozzle duct.
| 5.
REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT
|
 |
- Remove the screw <E> and the side No. 2 defroster nozzle duct.
| 6.
REMOVE DEFROSTER NOZZLE ASSEMBLY
|
 |
- Remove the clip.
Remove the 3 screws <E> and the defroster nozzle assembly.
| 7.
REMOVE CENTER HEATER TO REGISTER SUB DUCT
|
 |
- Remove the 2 screws <E> and the center heater to register sub duct.
| 8.
REMOVE NAVIGATION ANTENNA ASSEMBLY |
 |
- Remove the 2 screws and separate the navigation antenna assembly.
- Disengage the 3 clamps and remove the navigation antenna assembly.