2007-2013 Highlander Kluger · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE FRONT ARMREST UPPER BASE PANEL

  1. B172922E01
    Using a screwdriver with the tip wrapped with protective tape, disengage the 7 claws and clip, and remove the front armrest upper base panel.

  1. Disconnect the connector.


2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

  1. B172926
    Remove the 3 screws and the power window regulator master switch assembly.

← COMPONENTS (from May 2007)REMOVAL (Aug 2008 – Jun 2010) →