2007-2013 Highlander Kluger · Service Manual
BODY
Home
›
BODY
› WINDSHIELD / WINDOWGLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH
INSTALLATION
Removal / installation
·
Vehicles built from May 2007
1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
Engage the 2 claws and install the power window regulator switch assembly.
2. INSTALL FRONT ARMREST UPPER BASE PANEL
Connect the connector.
Engage the 7 claws and clip, and install the front armrest upper base panel.
← INSPECTION (from May 2007)
COMPONENTS (from May 2007) →