2007-2013 Highlander Kluger · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from May 2007


1. REMOVE FRONT ARMREST UPPER BASE PANEL

  1. B173466E01
    Using a screwdriver with the tip wrapped with protective tape, disengage the 7 claws and clip, and remove the front armrest upper base panel.

  1. Disconnect the connector.


2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY

  1. B173441
    Disengage the 2 claws and remove the power window regulator switch assembly.

← COMPONENTS (from May 2007)INSPECTION (from May 2007) →