2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL MULTI INFORMATION DISPLAY CLOCK ASSEMBLY

2. INSTALL NO. 2 RADIO BRACKET (w/o Navigation System)

  1. E150553
    Install the No. 2 radio bracket with the 5 screws.


3. INSTALL NO. 2 RADIO RECEIVER BRACKET (w/ Navigation System)

  1. E150547
    Install the No. 2 radio bracket with the 6 screws.


4. INSTALL NO. 2 RADIO BRACKET (w/o Radio Receiver)

  1. E155638
    Install the No. 2 radio bracket with the 3 screws.


5. INSTALL NO. 1 RADIO BRACKET (w/o Navigation System)

  1. E150554
    Install the No. 1 radio bracket with the 5 screws.

  1. E150546
    Engage the claw and install the connector.


6. INSTALL NO. 1 RADIO RECEIVER BRACKET (w/ Navigation System)

  1. E150548
    Install the No. 1 radio bracket with the 6 screws.

  1. E150546
    Engage the claw and connect the connector.


7. INSTALL NO. 1 RADIO BRACKET (w/o Radio Receiver)

  1. E155639
    Install the No. 1 radio bracket with the 6 screws.


8. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)
  1. Connect each connector.

  1. E150552
    Engage the 4 clips.

  1. E150551
    Install the radio receiver assembly with bracket with the 4 bolts.


9. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)
  1. Connect each connector.

  1. E150545
    Engage the 4 clips.

  1. E150544
    Install the navigation receiver assembly with bracket with the 4 bolts.


10. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY WITH BRACKET (w/o Radio Receiver)
  1. Connect each connector.

  1. B173010
    Engage the 4 clips.

  1. Install the integration control and panel assembly with bracket with the 4 bolts <D>.


11. INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System)
  1. Connect the connector.

  1. E150368
    Engage the 4 clips and install the heater control and accessory assembly.


12. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
  1. Connect the connector.

  1. E150367
    Engage the 4 clips and install the air conditioning control assembly.


13. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Entry and Start System)

  1. B184679E01
    Apply protective tape to the areas shown in the illustration.

  1. Connect each connector.

  1. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

    NOTICE:
    Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.


14. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Entry and Start System)

  1. B184681E01
    Apply protective tape to the areas shown in the illustration.

  1. Connect each connector.

  1. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

    NOTICE:
    Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.


15. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

  1. B168369
    Engage the 2 claws and 5 clips, and install the center instrument panel register assembly.

← REMOVAL (from Jul 2010)INSTALLATION (Aug 2008 – Jun 2010) →