2007-2013 Highlander Kluger · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL PURGE VSV

  1. A132953
    Install the purge VSV with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

  1. A175271
    Connect the wire harness clamp.

  1. Connect the 2 vacuum hoses and purge VSV connector.


2. INSTALL V-BANK COVER SUB-ASSEMBLY

  1. A162365
    Fit the 3 retainers and install the V-bank cover.

← INSTALLATION (May 2007 – Jul 2008)INSTALLATION (from Jul 2010) →