2007-2013 Highlander Kluger · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL DUTY VACUUM SWITCHING VALVE

  1. A171735
    Connect the vacuum hose sub-assembly to the duty vacuum switching valve.

  1. A171734
    Connect the hose to the duty vacuum switching valve.

  1. A171733
    Install the duty vacuum switching valve with a bolt.

    Torque:
    4.0 N*m{ 41 kgf*cm , 35 in.*lbf }

  1. A171732
    Connect the duty vacuum switching valve connector and clamp.


2. INSTALL VACUUM HOSE SUB-ASSEMBLY

  1. A172484
    Install the clamp of the vacuum hose sub-assembly to the front engine mounting insulator assembly.

  1. A171740
    Install the 2 clamps.

  1. A171739
    Connect the vacuum hose sub-assembly to the air cleaner cap sub-assembly and vacuum switching valve.


3. INSTALL NO. 1 ENGINE UNDER COVER

  1. A171855
    Install the No. 1 engine under cover with the 6 bolts and 2 clips.


4. INSTALL ENGINE UNDER COVER ASSEMBLY

  1. A171850
    Install the engine under cover assembly with the 2 bolts, 2 screws and 5 clips.

  1. A171849
    Install the engine under cover assembly RR with the 2 bolts.

← INSTALLATION (May 2007 – Jul 2008)INSTALLATION (from Jul 2010) →