2007-2013 Highlander Kluger · Service Manual BODY

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from May 2007


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG).

  3. Select the following menu items: Body / Sliding Roof / DTC.

  4. Check the DTC(s).


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG) and turn the tester on.

  3. Select the following menu items: Body / Sliding Roof / DTC / Clear.

  4. Press the YES button.

  5. Check that the DTCs are cleared.

← DIAGNOSIS SYSTEM (from May 2007)DATA LIST / ACTIVE TEST (from May 2007) →