2007-2013 Highlander Kluger · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT FRONT ENGINE MOUNTING INSULATOR ASSEMBLY
  1. Disconnect the vacuum hose from front engine mounting insulator assembly.

  1. A171736
    Using a vacuum pump, apply vacuum of 80 kPa (600 mmHg, 25 in.Hg) and wait for 1 minute.

  1. Check that there is no change in the needle movement of the vacuum pump gauge.

    OK:
    Vacuum pressure holds.

  1. Check that there is no fluid leakage caused by a break in the diaphragm.

  1. Reconnect the vacuum hose.

← REMOVAL (from Aug 2013)INSTALLATION (May 2007 – Jul 2008) →