2007-2013 Highlander Kluger · Service Manual BODY

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT POWER BACK DOOR WARNING BUZZER

  1. B177974E01
    Measure the resistance according to the value(s) in the table below.

    HINT:
    When battery voltage is applied directly to the buzzer, the buzzer will not sound.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    950 to 1050 Ω

    If the result is not as specified, replace the wireless door lock buzzer.

← REMOVAL (from Jul 2010)INSTALLATION (May 2007 – Jul 2008) →