2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from May 2007


1. INSTALL REAR DOOR COURTESY SWITCH ASSEMBLY
  1. Connect the connector.

  1. E150077
    Using a "TORX" socket wrench (T30), install the rear door courtesy switch assembly with the "TORX" bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

← INSPECTION (from May 2007)COMPONENTS (from May 2007) →