2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE NO. 2 ROOM LIGHT ASSEMBLY

  1. B132140E02
    Using a screwdriver, disengage the 4 claws and remove the lens cover.

    HINT:
    Tape the screwdriver tip before use.

  1. B132142E01
    Using a screwdriver, disengage the 2 claws <A> as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.

  1. Disengage the 2 claws <B>.

  1. B153052
    Using a screwdriver, disengage the 4 claws and remove the No. 2 room light assembly.

← COMPONENTS (from May 2007)REMOVAL (Aug 2008 – Jun 2010) →