2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. INSTALL TRANSPONDER KEY AMPLIFIER

  1. C115570
    Align the transponder key amplifier with the upper bracket. Tilt the amplifier slightly and slide it into the position as shown in the illustration.

  1. Push the transponder key amplifier to install it to the upper bracket with the 2 claws.

    NOTICE:
    Do not push the amplifier with excessive force.


2. INSTALL STEERING COLUMN COVER

  1. E151094
    Engage the claw and install the upper steering column cover.

  1. E151095
    Engage the 2 claws and install the lower steering column cover.

  1. E151101
    Turn the steering wheel assembly to the left and install the screw as shown in the illustration.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }

  1. E151100
    Turn the steering wheel assembly to the right and install the screw as shown in the illustration.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }

← INSTALLATION (May 2007 – Jun 2010)COMPONENTS (from May 2007) →