2007-2013 Highlander Kluger · Service Manual
BODY ELECTRICAL
Home
›
BODY ELECTRICAL
› LIGHTING › HIGH MOUNTED STOP LIGHT ASSEMBLY
INSPECTION
Inspection
·
Vehicles built from Jul 2010
INSPECT CENTER STOP LIGHT ASSEMBLY
Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.
Check that the high mounted stop light comes on.
OK:
The light comes on.
If the result is not as specified, replace the light assembly.
← REMOVAL (from Jul 2010)
INSTALLATION (from Jul 2010) →