2007-2013 Highlander Kluger · Service Manual HEATER & AIR CONDITIONING SYSTEM

DISASSEMBLY

Removal / installation · Vehicles built May 2007 – Jun 2010


1. PRECAUTION (for LHD)

NOTICE:
When disassembling the air conditioning control assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.


2. REMOVE REAR CONTROL PANEL CASE (for LHD)

  1. E226219
    Remove the 8 screws and rear control panel case.


3. REMOVE HEATER CONTROL KNOB (for LHD)
  1. Remove the heater control base sub-assembly with heater control knob.

  1. E226220
    Driver Side:

    1. Remove the heater control knob.

      NOTICE:
      1. Hold the sides of the heater control base sub-assembly.
      2. Pull the heater control knob away from the heater control base sub-assembly vertically.
      3. Do not remove the heater control knob by prying it off.

  1. E226221
    Passenger Side:

    1. Remove the heater control knob.

      NOTICE:
      1. Hold the sides of the heater control base sub-assembly.
      2. Pull the heater control knob away from the heater control base sub-assembly vertically.
      3. Do not remove the heater control knob by prying it off.


4. REMOVE NO.2 HEATER CONTROL KNOB (for LHD)

  1. E226222
    Disengage the 3 claws and remove the switch base with No.2 heater control knob.

← REMOVAL (from Jul 2010)REASSEMBLY (May 2007 – Jun 2010) →