Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch on (IG).

  3. Turn the Techstream main switch on.

  4. Select the following menu items: Powertrain / Cruise Control / Trouble Codes.

  5. Check the details of the DTC(s) (Click here).


DTC CLEAR
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch on (IG).

  3. Turn the Techstream main switch on.

  4. Select the following menu items: Powertrain / Cruise Control / Trouble Codes.

  5. Erase the DTCs.