Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

NAVIGATION SYSTEM > Map Display Incomplete

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK MAP DISC


    I100152E12
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks on the map disc.



NG
REPLACE MAP DISC
OK


2.CHECK NAVIGATION DISPLAY
  1. Check that displays other than the navigation display are complete.

    OK:
    No other incomplete displays are found.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)