FRONT PASSENGER AIRBAG ASSEMBLY > DISPOSAL |
| 1. PRECAUTION |
| 2. DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE) |
![]() |
Check the function of SST .
Refer to PRECAUTION (Click here).
Disconnect the cable from the negative battery terminal.
Remove the lower instrument panel sub-assembly .
Install SST.
![]() |
Disconnect the connector.
![]() |
Connect the SST connector to the instrument panel wire assembly.
![]() |
Move SST at least 10 m (33 ft.) away from the vehicle front side window.
Maintaining sufficient clearance for the SST wire harness in the front side window, close all doors and windows of the vehicle.
Connect the red clip of SST to the battery positive (+) terminal and the black clip of SST to the negative (-) terminal.
Deploy the airbag.
Check that no one is inside the vehicle or within a 10 m (33 ft.) radius of the vehicle.
Press the SST activation switch and deploy the airbag.
| 3. DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE) |
![]() |
Check the function of SST .
Remove the front passenger airbag assembly (Click here).
Install SST.
![]() |
After connecting the following SST to each other, connect them to the front passenger airbag assembly.
![]() |
Using braided wire, tie down the front passenger airbag assembly to an unneeded tire.
Position the front passenger airbag assembly inside the tire with the airbag deployment side facing inside.

![]() |
Place the tires.
Place at least 2 tires under the tire which the front passenger airbag assembly is tied to.
Place at least 2 tires over the tire which the front passenger airbag assembly is tied to. The top tire should have a wheel installed.
![]() |
Tie the tires together with the 2 wires.
Install SST.
![]() |
Connect the SST connector.
Move SST at least 10 m (33 ft.) away from the airbag tied down to the tire.
Deploy the airbag.
Connect the red clip of SST to the battery positive (+) terminal and the black clip of SST to the battery negative (-) terminal.
Check that no one is within a 10 m (33 ft.) radius of the tire which the front passenger airbag assembly is tied to.
Press the SST activation switch and deploy the airbag.
![]() |
Dispose of the front passenger airbag assembly.
Remove the front passenger airbag assembly from the tire.
Place the front passenger airbag assembly in a plastic bag, tie it tightly, and dispose of it according to local regulations.