Home › INTRODUCTION › INTRODUCTION › REPAIR INSTRUCTION

REPAIR INSTRUCTION > CUSTOMIZE PARAMETERS


HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.


AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

Air conditioning system: 
Display (Item)
Default
Contents
Setting
Set Temperature Shift
NORMAL
To control with shifted temperature against displayed temperature
+2 C / +1 C / NORMAL / -1 C / -2 C
Ambient Temperature Shift
NORMAL
To control with shifted temperature against displayed temperature
+3 C / +2 C / +1 C / NORMAL / -1 C / -2 C / -3 C
Air Inlet Mode
AUTO
Function to shift from INLET mode to RECIRCULATION mode when A/C is turned ON
MANUAL / AUTO
Compressor Mode
AUTO
Function to automatically turn A/C ON by pressing AUTO button when blower is ON and A/C is OFF
MANUAL / AUTO
Compressor / Air Inlet DEF Operation
LINK
Function to automatically turn A/C ON linked with FRONT DEF button when A/C is OFF
NORMAL / LINK
Evaporator Control
AUTO
Function to set evaporator control to AUTOMATIC position (AUTO) to save power, or to coldest position (MANUAL) to dehumidify air and to prevent windows from fogging up
MANUAL / AUTO
Foot / DEF Auto Mode
ON
Function to automatically turn airflow from FOOT/DEF ON when AUTO MODE is ON
OFF / ON
Foot / DEF Automatic Blow Up Function
ON
Function to automatically increase blower level when defroster is ON
OFF / ON

THEFT DETERRENT SYSTEM (w/ Smart Key System)

Security: 
Display (Item)
Default
Contents
Setting
Passive Mode (Security System)
OFF
  1. Passive Mode is a function that switches the theft deterrent system from the arming preparation state to the armed state 30 seconds after the key is removed from the actuation area and all doors, glass hatch* and engine hood are closed, even if the doors are not locked by wireless or door key lock operation.
  2. In Passive Mode, if the following operations are not performed within 14 seconds after a door is opened during armed state, the theft deterrent system will judge that condition as a theft and switch to the alarm sounding state.
    1. Unlock any door by key or wireless operation
    2. Turn the engine switch on (IG)
ON / OFF
Warning by Horn
ON
Function that allows the vehicle horn and theft deterrent horn to be used as warning devices.
ON / OFF
Entry Delay
14 s
Function that changes entry delay time (time before warning starts) for Passive Mode
0 s / 14 s / 30 s

HINT:
*: w/ Glass Hatch Opener System


THEFT DETERRENT SYSTEM (w/o Smart Key System)

Security: 
Display (Item)
Default
Contents
Setting
Passive Mode (Security System)
OFF
  1. Passive Mode is a function that switches the theft deterrent system from the arming preparation state to the armed state 30 seconds after the key is removed from the key cylinder and all doors, engine hood and luggage compartment door are closed, even if the doors are not locked by wireless or door key lock operation.
  2. In Passive Mode, if the following operations are not performed within 14 seconds after a door is opened during armed state, the theft deterrent system will judge that condition as a theft and switch to the alarm sounding state.
    1. Unlock any door by key or wireless operation
    2. Turn the ignition switch to the ON position
    3. Open the luggage compartment door by key or wireless operation
ON/OFF
Warning by Horn
ON
Function that allows the vehicle horn and theft deterrent horn to be used as warning devices
ON/OFF
Entry Delay
14 s
Function that changes entry delay time (time before warning starts) for Passive Mode
0 s/14 s/30 s
Warning by Glass Broken Sensor
ON
Function that turns the glass breakage sensor on/off. This function is only effective for vehicles with glass breakage sensor.
ON/OFF

LIGHTING SYSTEM

Illuminated Entry: 
Display
Default
Contents
Setting
Lighting Time
15 s
Changes the lighting time of the personal light, interior lights and ignition key cylinder light*1/engine switch illumination*2 after closing all of the doors. (It will quickly fade out when the ignition switch is turned on (IG))
7.5 s / 15 s / 30 s
I/L when ACC OFF
ON
Lights up the personal light, interior lights and ignition key cylinder light*1/engine switch illumination*2 when the ignition switch is turned from on (ACC or IG) to off.
ON / OFF
I/L ON W/Door Key Unlock
ON
Lights up the personal light, interior lights and ignition key cylinder light*1/engine switch illumination*2 when the doors are unlocked using the mechanical key.
ON / OFF
Mirr-Foot-Lgt Approached
ON
Lights up the door mirror foot lights when the key enters actuation area around the doors.
ON / OFF
Mirr-Foot-Lgt Unlocked
ON
Lights up the door mirror foot lights when the doors are unlocked using door control transmitter or mechanical key.
ON / OFF
Mirr-Foot-Lgt w/Master SW
ON
Lights up the door mirror foot lights when the doors are unlocked with the door control switch.
ON / OFF
Mirror Foot Light Time
15 s
Changes the lighting time of the door mirror foot lights.
0 s / 7.5 s / 15 s / 30 s

HINT:
  1. *1: w/o Smart Key System
  2. *2: w/ Smart Key System


Light Control: 
Display
Default
Contents
Setting
Disp Ex ON Sen
Normal
Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light, and clock.
Light2 / Light1 / Normal / Dark1 / Dark2
Disp Ex OFF Sen
Normal
Changes the ambient brightness level required to cancel the dimming of the combination meter indicator lights, A/C indicator light, and clock.
Light2 / Light1 / Normal / Dark1 / Dark2
Light Auto OFF Delay
30 s
Keeps the headlights on for a certain period of time after turning the ignition switch off and closing all the doors with the headlights on.
OFF / 30 s / 60 s / 90 s
Sensitivity
Normal
Adjusts the sensitivity of the automatic light control function.
Light2 / Light1 / Normal / Dark1 / Dark2
DRL Function
ON
ON / OFF of the DRL function.
ON / OFF

POWER DOOR LOCK CONTROL SYSTEM

Main Body (Main Body ECU): 
Display
Default
Contents
Setting
Unlock Key Twice
ON
Function that unlocks only driver side door when driver side door key cylinder is turned to UNLOCK once, and unlock all doors when it is turned to UNLOCK twice. For OFF setting, turning it once unlocks all doors.
ON / OFF
Auto Lock/Shift
ON
Function that locks all doors when shift lever is shifted to P from any other position with engine running and all doors closed
ON / OFF
Auto Unlock/Shift
ON
Function that unlocks all doors when shift lever is shifted to P from any other position while the ignition switch is on (IG)
ON / OFF
All Unlock/Open-Close
OFF
Function that unlocks all doors when opening driver door within 10 seconds after turning the ignition switch on (IG)
ON / OFF
Auto Lock
OFF
Function that locks all doors when the vehicle reaches a certain speed
ON / OFF

WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Key System)

Wireless Door Lock 
Display (Item)
Default
Contents
Setting
Wireless Control
ON
ON/OFF of wireless door lock function
ON/OFF
Hazard Answer Back
ON
When LOCK switch on transmitter pressed, all hazard warning lights illuminate once. When UNLOCK switch pressed, all hazard warning lights illuminate twice
ON/OFF
Wireless Buzzer Resp
ON
Function that makes wireless buzzer sound for answer-back when transmitter LOCK/UNLOCK switch pressed
ON/OFF
Wireless Auto Lock
ON
Function to control automatic relocking of doors after unlocking with wireless door lock function.
ON/OFF
Open Door Warning
ON
If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds
ON/OFF
Unlock 2 Operation
ON
Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.
ON/OFF
Auto Lock Time
60s
This function controls amount of time from unlocking doors to automatic re-locking function
30s/60s/120s
Panic Alarm Function
ON
Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 0.8 seconds
ON/OFF

WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System)

Wireless Door Lock 
Display (Item)
Default
Contents
Setting
Wireless Control
ON
ON/OFF of wireless door lock function
ON / OFF
Hazard Answer Back
ON
When LOCK switch on transmitter pressed, all hazard warning lights illuminate once. When UNLOCK switch pressed, all hazard warning lights illuminate twice
ON / OFF
Wireless Buzzer Resp
ON
Function that makes wireless buzzer sound for answer-back when transmitter LOCK/UNLOCK switch pressed
ON / OFF
Open Door Warning
ON
If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds
ON / OFF
Wireless Auto Lock
ON
Function to control automatic relocking of doors after unlocking with wireless door lock function.
ON / OFF
Unlock 2 Operation
ON
Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.
ON / OFF
Panic Function
ON
This function operates the theft deterrent system when PANIC is pressed and held for 0.8 second or more.
ON / OFF
Auto Lock Time
60s
This function controls amount of time from unlocking doors to automatic re-locking function.
30 s / 60 s / 120 s
Wireless Glass Hatch Open*
Long 1
This function changes operation method of transmitter to glass hatch.
1tim ON: Push once
2tim ON: Push twice
Long 1: Push and hold for 0.6 seconds
Long 2: Push and hold for 0.8 seconds
Prohibit: Does not operate

HINT:
*: w/ Glass Hatch Opener System


SMART KEY SYSTEM

Smart Key (Certification ECU (Smart Key ECU Assembly) (SMART)): 
Display (Item)
Default
Contents
Setting
Ignition Available Area
ALL
Function to choose the available area for electrical key to start engine and release the steering lock.
FRONT / ALL
Park Wait Time
2.5s
Function that sets waiting time to permit opening door after door is locked with entry lock function.
0.5 s / 1.5 s / 2.5 s / 5.0 s
Glass Hatch Open Operation
ON
Function to open the glass hatch when the driver has the electrical key and presses glass hatch opener switch.
ON / OFF
Back Door Opening Operation
LONG
Function to open the back door when the driver has the electrical key and presses back door opener switch.
LONG / TWICE / OFF

Smart Key (Certification ECU (Smart Key ECU Assembly) (WARNING)): 
Display (Item)
Default
Contents
Setting
Passenger Take Key
ON
Function to warn that the electrical key is taken out by passengers (It means that the key is taken out from except the driver's door) when engine is running.
ON / OFF
Key Out Range Warning
ON
Function to set a warning function for trying to start the engine before key is still out of its range.
ON / OFF
Key Low Battery Warning
ON
Function to set a warning function for the time when a key battery becomes weak.
ON / OFF

ENTRY UNLOCK MODE SWITCHING FUNCTION

HINT:
The function only changes the entry unlock mode of the smart key system. This function is not for the wireless door lock control.

  1. To change the vehicle to entry unlock mode switching function:

    1. Driver door unlock mode:
      When the driver door's touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.
    2. All door unlock mode:
      When any touch sensor is touched, all doors unlock.

    1. When the engine switch is off, press the LOCK button and one of the other buttons on the key at the same time for approximately 5 seconds while the key is in the actuation area.

    2. The certification ECU (smart key ECU assembly) receives this signal from the door control receiver and switches the entry unlock mode.

    3. The certification ECU (smart key ECU assembly) sounds the wireless door lock buzzer and the buzzer in the combination meter to inform the user that the mode has been switched.

    4. If the entry unlock mode needs to be switched again, press the LOCK button and one of the other three buttons on the key at the same time for approximately 5 seconds after the LED of the key goes off.

      NOTICE:
      After pressing and holding the switches for 4.5 seconds, wait 5 seconds before performing the same procedure again.

  2. The certification ECU (smart key ECU assembly) receives this signal from the door control receiver and changes the smart key system to the entry unlock mode.



  3. The certification ECU (smart key ECU assembly) sounds the wireless door lock buzzer and the buzzer of the combination meter to inform the user that the mode has been switched.


    B171364E02


ELECTRICAL KEY CANCEL
The electrical key cancel operation disables the following functions:
  1. Entry Unlock/Lock
  2. Entry Back Door Open
  3. Entry Glass Hatch Open
  4. Electrical Key Lock-in Prevention
  5. Warning
  1. The operation procedures are as follows:
    Precondition:
    Engine switch off, driver side door closed and unlocked.

    1. Unlock the driver side door once with the UNLOCK switch of the electrical key.

    2. Open the driver door within 5 seconds.

    3. Unlock the driver side door twice with the UNLOCK switch of the electrical key within 5 seconds.

    4. Close and open the driver door twice within 30 seconds.
      (Driver Door: Close → Open → Close → Open)

    5. Unlock the driver side door twice with the UNLOCK switch of the electrical key within 5 seconds.

    6. Close and open the driver door within 30 seconds.
      (Driver Door: Close → Open)

    7. Close the driver door within 5 seconds.
      When electrical key cancel is activated, the wireless door lock buzzer sounds twice.
      To return to the original condition, perform the procedures again. When the original condition is returned, the wireless door lock buzzer sounds once.


METER / GAUGE SYSTEM

Combination Meter: 
Tester Display
Default
Contents
Setting
Key Remind Volume
Large
Function to change the volume of the key reminder buzzer.
Large, Medium, Small
Key Remind Sound
Slow
Function to change the frequency of the key reminder buzzer.
Fast, Normal, Slow
Driver Side Seatbelt Warning Buzzer (*)
On
Function to change the seat belt warning buzzer.
On, Off
Front Passenger Side Seatbelt Warning Buzzer (*)
On
Function to change the seat belt warning buzzer.
On, Off

HINT:
*: This setting is only valid for the buzzer which sounds at the 20 km/h (12 mph) or more.


POWER WINDOW CONTROL SYSTEM

Power Window (Main Body ECU): 
Tester Display
Default
Contents
Setting
Door Key P/W Up
ON
Function that raises all power windows when, with engine switch off, key is used to hold driver door key cylinder to lock position for more than 2.3 seconds
ON / OFF
Door Key P/W Down
ON
Function that lowers all power windows when, with engine switch off, key is used to hold driver door key cylinder to unlock position for more than 2.3 seconds
ON / OFF
P/W Down W/ Transmit
ON
Function that lowers all power windows when, with engine switch off, unlock switch on transmitter is pressed and held for more than 3.0 seconds
ON / OFF

POWER BACK DOOR SYSTEM

Power back door system 
Display (Item)
Default
Function
Setting
PBD SW Operation
0.8 s
Function that turns power back door closer switch ON when switch is pushed once or held down for 0.8 sec.
0.8s / ON
PBD Buzzer
ON
This function makes the power back door buzzer sound when power back door is operating
ON / OFF
Wirels PBD SW Operation
0.8 s
Function that operates power back door when transmitter switch is pressed in specified way
ON / 2 times / 0.8 s / OFF