Home › ENGINE › 2GR-FE FUEL › FUEL PUMP

FUEL PUMP > INSPECTION

for Preparation Click here



1. INSPECT FUEL PUMP


    A091823
  1. Inspect fuel pump resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      0.2 to 3.0 Ω at 20°C (68°F)

  1. Inspect fuel pump operation.

    1. Apply battery voltage to both the terminals. Check that the pump operates.

      NOTICE:
      1. These tests must be done quickly (within 10 seconds) to prevent damage to the pump.
      2. Keep the fuel pump as far away from the battery as possible.
      3. Always do the switching at the battery side.